|
Grade+ |
- Where to find it:
- Add Adjustment Layer / Extension Pack / Color Correction /
NodeGraph / Right Mouse Click / Nodes / Filter / Extension Pack / Color Correction /
The Grade+ Node is based on Mari's default Grade Node with a few attempts to get it more in line with Nuke's Grade Node.
MAIN TAB
|
|
Due to Interface restrictions the color fields under the sliders do not override the sliders themselves (different from Nuke) Instead the Sliders are multiplied with the values from the Color field Slider * Colorfield On 'Blackpoint', 'Lift' and 'Offset' this multiplication would result to a value of 0.0 by default so if those sliders are set to 0.0 only the Color Field is evaluated. Clicking on the 'S' button next to the slider will change the Interface to allow you a numerical input for Red,Green, Blue & Alpha Channel separately
|
- Blackpoint
Adjust the Blackpoint to allow you to change the darkest point in the paint
- Blackpoint Color/Value
The Color Selection under the Blackpoint Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Blackpoint Slider unless that slider is set to 0.0.
A slider value of 0.0 and a color value of 1.0 only uses the Color Field's Value
- Whitepoint
The Whitepoint allows you to increase the brightest point in the paint.
- Whitepoint Color/Value
The Color Selection under the Whitepoint Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Whitepoint Slider unless that slider is set to 0.0.
- Lift
Adds the specified Value to your paint
- Lift Color/Value
The Color Selection under the Lift Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Lift Slider unless that slider is set to 0.0.
A slider value of 0.0 and a color value of 1.0 only uses the Color Field's Value
- Gain
Gain is a multiplier on your Multiply and a division on your Blackpoint and Whitepoint.
- Gain Color/Value
The Color Selection under the Gain Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Gain Slider unless that slider is set to 0.0.
- Multiply
Multiplies the selected value against your paint
- Multiply Color/Value
The Color Selection under the Multiply Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Multiply Slider unless that slider is set to 0.0.
- Offset
Offset changes the Black & Whitepoint as one
- Offset Color/Value
The Color Selection under the Offset Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Offset Slider unless that slider is set to 0.0.
A slider value of 0.0 and a color value of 1.0 only uses the Color Field's Value
- Gamma
Standard Gamma Control Setting
- Gamma Color/Value
The Color Selection under the Gamma Slider allows you to set a color or value via a color picker.
This allows you to affect each Color channel separately similar to when pressing 'S' next to a slider.
Values of the Color Field are multiplied against the Gamma Slider unless that slider is set to 0.0.
CHANNELS TAB
- Red / Green / Blue / Alpha
Only the selected channels will receive grade changes allowing you to selectively grade just one or two color channels.